Tapers Road Lamp Pole Longitudinal Seam Welding Machine

Light pole shut and welding Machine

 1、Machine Descriptions：

The street lamp pole shut and welding integrated machine is suitable for one piece type polygonal and circle taper light pole. it is automatic welding line, the dolly with speed adjustable motor can pull (or push) the light pole from small end to big end, The hydraulic cylinder through mechanical chain, worm wheel push the clamping wheel to close the pole and do welding at same time.

The production efficiency of the street lamp pole whose plate thickness is not more than 8mm can be improved by 3-5 times. The street lamp pole shut and welding integrated machine is widely used to manufacture street lamp poles, signal lamp poles, square flag poles, 5G communication poles... etc

2、Main Technical Parameters:

Model : LPSW--500/12000

Light pole shape: taper polygonal or circle

Light pole wall Max thickness: 8 mm

Light pole diameter: 60-500 mm

Light pole length: 12000 mm

Power of pump station :  AC 4 KW

Power of pulling dolly: AC,4 KW , Speed changeable by VFD

Welding speed: 0.2~2 m/min

Welding Machine: 630A, (Submerged Arc Welding or Gas-shielded welding(CO2) Welding)

Welding wire diameter: 1.2、1.6、2mm welding wire, according the pole wall thickness and welding type SAW or CO2 way. 

Gross weight: 7000 kg

Overall sizes(Lx Wx H): 22000x2000x2000 mm

Suitable light pole  Diameter and Thickness ( Low carbon steel yield strength Q235)

How to calculate the taper ratio of street light pole?

Compared with large/small rods and straight rods, the manufacturing process of taper rods is more complex, but the taper rods have the advantages of good wind resistance, high strength and beautiful appearance. The taper ratio of the taper bar refers to the ratio of the taper bar (diameter difference between the lower and upper diameters) to the height of the taper bar.

For example, the taper ratio of street light pole with lower diameter of 132mm, upper diameter of 60mm and height of 5800mm is:（132-60）/ 5800=12.41:1000

The normal taper ratio is (10-15): 1000, and the international standard is 12:1000.

Why choose us--- China Zhouxiang Complete Set of Welding Equipment Co.,Ltd ?

As the largest H-beam manufacturing equipment manufacturer in China, we have strong design and manufacturing capabilities, with an annual production capacity of US$40 million.

How to produce qualified H-beam? It is an important category of our continuous research for 30 years. Our main products are: CNC Control Flame/plasma cutting machine、H beam Assembling machine、H Beam Welding Machine、H beam straightening machine、H beam shot blasting machine、H beam assembly-welding-straightening multi-functions machine、H beam Horizontal Productions Line、automation welding machine etc.